With an irrigation system, you can increase the productivity of your crops, especially in areas and regions where there is not enough rainwater. Capable of operating over large areas, Pivot can bring you profits with high yields.

- ATTENTION, READ THIS (but keep in mind that this is a Google translator and there may be translation errors): For the correct operation of all complex systems in this mod, carefully read the entire description to fully understand how everything works and not have any problems during the game.

To use it and launch it, you will buy a Pivot disassembled in a container with a trailer, which must be transported to the site, where it will be assembled in the middle of the cultivated area.

Make sure that there is enough space on the site where you are going to assemble it (the slope of the terrain does not affect this, since it is flexible and can follow the terrain).
After arriving at the location, unhook the truck and enter the container as if it were a vehicle. Once inside, to assemble your rotary mechanism, you must press the lid opening function (N key on PC, LB + < left arrow on Xbox, L1 + < left arrow on PlayStation), which will remove the container from the trailer, after which the container will disappear and you will begin to assemble the entire structure of the rotary mechanism.
To load fertilizer, take a pallet or fertilizer tank next to the engine room at the end of the rotary mechanism. After loading and starting the irrigation, turn it into rotation mode, and even after lowering it, it will rotate independently, as described below.
When the container trailer is stationary or in storage, it will appear that its wheels are sunk into the ground. This is due to the huge weight of the rotary mechanism, but this is only a visual error.
The deployment position of the rotary mechanism is directed towards the bottom of the container, in the same area as the door (there is an arrow on the side of the container indicating the direction).

PRECAUTIONS AGAINST POSSIBLE PROBLEMS:
- Do not press the rotate key before unfolding, if you do, it will not unfold, so first unfold, then turn on the atomizer and set the rotation to the key combination X on PC, LB + A on Xbox and L1 + X on PlayStation;
- Do not collect in places where there is no place, as this may lead to a collision conflict;
- If your engine compartment floats, is half submerged in the ground during assembly, or does not appear (if you have an additional engine compartment), disassemble the rotary assembly until it switches to trailer mode with a container, and assemble it again;
- Leave machinery, trees or objects in the rotation area of the rotary unit;
- Make sure that you always place the rotary tower in the center of your field;
- The center point of the turning tower will be in the same place as the trailer;
- Due to the very heavy weight, even the swivel unit or container trailer cannot be moved by pushing or pushing it;
- It is necessary to level the area where we are going to place the turning point and remove the soil layer, otherwise the base will vibrate. Use landscape paint on the base as well as under the engine room;

In order for the turning points to work, they are built into an engine-powered vehicle, so they can work without having to be attached to a motorized vehicle.
We can also allow them to work without having to be in a vehicle. To do this, we need to disable automatic startup in the vehicle settings. Even then, the vehicles turn off after 3 minutes if you are more than 300 meters away.
On a PC, this is solved using the "Disable Engine Shutdown" mod, which prevents the engines from shutting down even if you are more than 300 meters away.
This mod does not exist for consoles, so there are different configurable turn times, one of which is 3 minutes, which is very fast, but solves the shutdown problem.

Information:
Sessions Pivot 1:
- Price: 30,000 USD;
- Working width: 126 meters;
- Rotation configuration and duration: full turn, 3/4 turn, 1/2 turn and 1/4 turn, duration 3, 5, 10, 20 and 30 minutes.

Sessions Pivot 2:
- Price: 50,000 USD;
- Working width: 202 meters;
- Rotation configuration and duration: full turn, 3/4 turn, 1/2 turn and 1/4 turn, duration 3, 5, 10, 20 and 30 minutes.

Sessions Pivot 3:
- Price: 70,000 USD;
- Working width: 284 meters;
- Rotation configuration and duration: full turn, 3/4 turn, 1/2 turn and 1/4 turn, duration 3, 5, 10, 20 and 30 minutes.

Sessions Pivot 4:
- Price: USD 90,000;
- Working width: 372 meters;
- Rotation configuration and duration: full turn, 3/4 turn, 1/2 turn and 1/4 turn, duration 3, 5, 10, 20 and 30 minutes.