Corteva Pivot Circular Irrigation
Category: Yield Enhancement / Sprayers

attention: For this mod to work properly, read everything in this description carefully, otherwise the mod may not work properly, take a little time to read, and you can fully enjoy the mod.

Circular irrigation systems irrigate large areas in a circular manner.

They are used in places where water is a strong limiting factor.
The efficiency of circular irrigation ranges from 85% to 90%.
Liquid fertilizers and herbicides can also be added to irrigation.

In order for the circular systems to work, I had to integrate them into a vehicle with an engine.
In this way, they can operate without having to be attached to a vehicle.
We can also leave them to work without being in the vehicle.
To do this, we need to disable automatic startup in the vehicle settings.
However, the vehicles turn off after 3 minutes if we are more than 300 meters away from it.

Now let's look at the function and how it works.
Functions (in order in the store)
- Base price: 45,800 USD.
- Working width: 68 meters, 124 meters, 180 meters and 236 meters.
- Field contour guides: (yes or no)
- Coupling configuration: Low coupling (ball) or Normal coupling (pin)
- Number of sessions: 1 section (radius 68 meters), 2 sections (radius 124 meters), 3 sections (radius 180 meters) or 4 sections (radius 236 meters)
- Rotation and duration configuration: Full circle, 3/4 circle, 1/2 circle and 1/4 circle, duration 3, 5, 10, 20 and 30 minutes.
- Note: Short durations (3 and 5 minutes) cause the rotary machine to turn very quickly, and it hits at the beginning and at the end.
- Color configurations.
- Tank capacity: 4000 liters of liquid fertilizer or herbicide.
- Consumption of liquid fertilizer or herbicide: 500 liters per full revolution and a duration of 30 minutes.

Work features:
- Warnings: The rotary unit can only be unfolded and folded in the original position of the rotary unit. Never rotate the rotary unit unless it is unfolded.
- Take the trailer to the field where we want to install it.
- Note: Although the rotary unit adapts well to sloping terrain, it performs best and has the least vibration on flat terrain.
- If we select the guides in the store, we can make them visible using the left mouse button and see if it fits where we want to place it, these guides are also useful for drawing fields.
- It is necessary to level the area where we are going to place the rotary installation and remove the soil layer, otherwise the base will vibrate.
- We place the trailer in the direction in which we want the pivot axle to travel, the pivot axle turns towards the rear of the trailer.
- After placing it in the right place, we disconnect it from the vehicle on which we are transporting it, approach the trailer and get into it as if it were an ordinary vehicle (E key).
- Now we turn the rotary axis with the Z key (open the lid), the more sessions the rotary axis has, the more difficult it is to turn it around, until the red rotating lights go out, it will not be fully deployed.
- Now we fill the tanks with liquid fertilizer or herbicide.
- Note: Diesel fuel should never be refueled, as it has zero consumption.
- After deploying and filling the tanks, we turn on the atomizer with the B key and turn it with the X key.
- Now we can get off the rotary axle and let it work.
- The rotary axis stops automatically when it reaches the end, but the sprayers won't turn off, you need to turn them off manually.

In version 2.0.0.0:
- Models with 2, 3 and 4 sections could not be filled, they were repaired.