With this script, the harvester stops when it is full. It is then held for 5 seconds, during which the brake lights also light up.
When the combine is full and the roller has been active, it turns off for a short time and turns on again so that the straw does not accumulate behind the combine.

You can also activate the automatic control of the discharge pipe. This can be enabled in 5 steps:
- Off
- 70%
- 80%
- 90%
- 100%

The percentages indicate the level at which the discharge pipe is automatically extended.

If the automatic control of the discharge pipe is active, the discharge pipe is automatically retracted when it is automatically extended, and the harvester is allowed.

Keyboard shortcuts for automatic control of the discharge pipe:

Keyboard: [U]
Controllers (XBox): [LB] + [RB] + [A]
In version 1.1.0.0:
- The mod no longer causes log errors on self-propelled cotton harvesters.
- For Oxbo MKB-4TR and BP2140e, you can now select only "off" or "100%" for automatic hopper control. This does not make sense if the hopper rises before reaching the capacity, thereby interrupting the harvest.