Two-section electric locomotive ES10/3ES10 "Sinara".

- An amplifier section is available;
- 10 configurations with 5 color options;
- Lowered and raised pantograph;
- Working lights;
- Movable wheels;
- Good handling.

Configurations marked "Front" (Front) — front locomotive, marked "Rear" (Rear) — rear. To connect them, switch to the rear locomotive, release the brakes (Space bar) and change the direction of travel (Alt + A).

How to connect the amplifier section:
1. Place a section between two locomotives;
2. Switch to the front locomotive and press L; the booster section should lock;
3. Switch to the rear locomotive, release the brakes and change the direction of travel;
4. Switch to the amplifier section and press Shift + L;
5. Switch to the rear locomotive, press L and reverse to the booster section.

To connect different cars, switch to the rear locomotive and press Shift + L. Switch to each last coupled carriage one at a time by pressing Shift + L. If the car does not lock, move it out of the frame by grabbing the knots or turn the car.

H is the whistle.
T — accelerate and press W
G — slow down and press S
Alt + A — change direction
K — main spotlight;
I — left headlight;
O — right headlight;
[ — left taillight;
] — right taillight;
U — cabin lamp;
B is the engine compartment lamp.

If the train is not moving, make sure that it is not stuck on the rails, press F11 and lift it up slightly. If the train is still not moving, release the air brakes (down arrow) and the independent brakes (P/space bar) and switch to the m1 position.