The rotary strip control allows you to combine functions in the vehicle and activate them together with a single click to simplify turning maneuvers during field work. All functions can be activated and deactivated individually for each vehicle through the graphical interface to achieve perfect adaptation to the work being performed.

 The rotary strip control must be added to the corresponding vehicle as a configuration in the store or workshop before use. The cost of this is 3000.
It can be activated and deactivated in the vehicle. Various buttons can also be configured to be activated and deactivated.

 Functions included:
- Speed reduction (cruise control) and its re-activation, re-activation of cruise control if it was previously active
- Lifting of lowered implements and their re-lowering, optionally lifting of front implements before lifting of rear implements
- Turning of the plow, one-step or two-step (through the center position)
- Lifting and changing of track markers
- Changing the side with the crab mode activated
- Disabling the power take-off shaft(s) and hydraulics and re-enabling
- Warning signal when the reversing lane mode is activated
- On/off switch: the reversing lane control can be turned on and off. This prevents accidental activation during movement to the work site and improves road safety.
- Automatic reversing lane control: the reversing lane mode is automatically activated when the reversing lane is reached. It is possible to return to the field mode after completing a 180° turn.
- The ability to temporarily disable automatic reversal on the reversal lane by pressing a button
- Contour navigation: automatic control along the field boundary or along the cultivated area
- Configuration is saved and restored for each device type

With the existing EnhancedVehicle (FS25_EnhancedVehicle):
- Deactivation and re-activation of GPS lane navigation, optionally activating the reversal function
- Disabling and resetting active differential locks
- Using the EV reversal lane detection if it was activated

Pre-assigned key combinations (can be changed):
- Turning on/off the turn lane control: (left) Shift + (left) Alt + X
- Switching the operation mode (field mode / turn lane mode): (left) Shift + X
- Calling the graphical interface for configuration: (left) Shift + (left) Ctrl + X

Other prepared key combinations (not pre-assigned)
- Temporarily disabling/reactivating (switching) the automatic turn lane function
- Temporarily deactivates the automatic turn lane function
- Reactivates the automatic function
- Activates the field mode
- Activates the turn lane mode

In version 3.0.3.0:
- Compatible with the CousePlay GPS extension