Description of the Headland Management mod:
The turn lane control allows you to combine functions in a vehicle and activate them together at the touch of a button to simplify turning maneuvers during field work. All functions can be activated and deactivated individually for each vehicle via the graphical interface to achieve an ideal adaptation to the work performed.

The turn lane control must be added to the corresponding vehicle as a configuration in the shop or workshop before use. The cost of this is 3,000.
It can be activated and deactivated in the vehicle. Various buttons can also be configured for activation and deactivation.

Enabled functions:
- Reducing the speed (cruise control) and re-raising it, re-enabling cruise control if it was previously active
- Lifting the lowered guns and lowering them again, optionally lifting the front guns before lifting the rear guns
- Turning of the plow, single-stage or two-stage (through the central position)
- Lifting and changing track markers
- Changing sides with activated crab move
- Turning off the power take-off shaft(s) and hydraulics and turning it on again
- Warning signal when turning lane mode is activated
- On/off switch: The control of the turning lane can be turned on and off. This prevents accidental activation while moving to the work site and increases road safety.
- Automatic U-turn lane control: Automatically activates the U-turn lane mode when the U-turn lane is reached. It is possible to return to field mode after completing the 180° rotation.
- The ability to temporarily disable automatic U-turn on the turn lane by pressing a button
- Contour navigation: automatic control of the field boundary or the cultivated area
- Configuration is saved and restored for each type of device

With an existing EnhancedVehicle (FS25_EnhancedVehicle):
- Deactivation and reactivation of GPS lane navigation, optionally activation of the turn function
- Disabling and resetting the active differential locks
- Using EV reversal lane detection if it has been activated

Pre-assigned keyboard shortcuts (can be changed):
- Turn lane control on/off: (left) Shift + (left) Alt + X
- Switching the operating mode (field mode / turn lane mode): (left) Shift + X
- Calling the graphical interface for configuration: (left) Shift + (left) Ctrl + X

Other prepared keyboard shortcuts (not pre-assigned)
- Temporary deactivation/reactivation (switching) of the automatic turn lane function
- Temporarily deactivating the automatic turn lane function
- Re-activation of the automatic function
- Field mode activation
- Activation of the turn lane mode

In version 3.0.0.1:
- Fixed an error in the processing of ActionEvents, due to which keyboard input was partially ignored
- Restored accessibility in mission vehicles